Wednesday, November 27, 2019
My Diary Essays (353 words) - , Term Papers
My Diary Dear Diary, Today was a pretty same old same old day. I woke up to Alia scrambling around her room at ten to seven, I was laughing cause I think she was looking for me(she never looks hard enough) finally her cat Princess jumped on her vanity and I rolled on to the floor. Alia found me put me onI feel so loved and needed when she does that.and put me in the pocket of her cute Lauzares uniform..(her private school).it is so cute..its a short little green red and navy plaid skirt..a white collared shirt and a red tiehigh socks..cute little mary janes..its adorable. Well anyways as I was sayingshe put me in her pocket and she drove to school.and her little friends were there waiting for her to fill he in the latest Lauzares gossip ..she walked into school and of course..applied me..im so special!!!..and then went to her pink locker..there art club were board and so for a project the painted the whole school all these brite colorshe locker is so pretty he books are all nice and neat with he mirror, cute little magnetic memo pad, and pictures of her friends and her.i was nice and comfy in her locker until next periodthen the coolest thing of all match maker me.accidently fell on the f loor on the way out of chemistry.right in front of the hottest head foot ball playerhe picked me up for her ..she put me in her pocket ..made eye contact and he ended up walking her to her Speach and Drama class.she also has a date with him on Friday thank me very much.well that was the high light of my day..now if you would excuse me a beautimaker need her rest to. Poetry Essays
Sunday, November 24, 2019
Buddhism and Vegetarianism
Buddhism and Vegetarianism All Buddhists are vegetarians, right? Well, no. Some Buddhists are vegetarians, but some are not. Attitudes about vegetarianism vary from sect to sect as well as from individual to individual. If you are wondering whether you must commit to being a vegetarian to become a Buddhist, the answer is, maybe, but possibly not. It is unlikely the historical Buddha was a vegetarian. In the earliest recording of his teachings, the Tripitaka, the Buddha did not categorically forbid his disciples to eat meat. In fact, if meat were put into a monks alms bowl, the monk was supposed to eat it. Monks were to gratefully receive and consume all food they were given, including meat. Exceptions There was an exception to the meat for alms rule, however. If monks knew or suspected that an animal had been slaughtered specifically to feed monks, they were to refuse to take the meat. On the other hand, leftover meat from an animal slaughtered to feed a lay family was acceptable. The Buddha also listed certain types of meat that were not to be eaten. This included horse, elephant, dog, snake, tiger, leopard, and bear. Because only some meat was specifically forbidden, we can infer that eating other meat was permissible. Vegetarianism and the First Precept The First Precept of Buddhism is do not kill. The Buddha told his followers not to kill, participate in killing, or cause to have any living thing killed. To eat meat, some argue, is taking part in killing by proxy. In response, it is argued that if an animal were already dead and not slaughtered specifically to feed oneself, then it is not quite the same thing as killing the animal oneself. This seems to be how the historical Buddha understood eating meat. However, the historical Buddha and the monks and nuns who followed him were homeless wanderers who lived on the alms they received. Buddhists did not begin to build monasteries and other permanent communities until some time after the Buddha died. Monastic Buddhists do not live on alms alone but also on food grown by, donated to, or purchased by monks. It is hard to argue that meat provided to an entire monastic community did not come from an animal specifically slaughtered on behalf of that community. Thus, many sects of Mahayana Buddhism, in particular, began to emphasize vegetarianism. Some of the Mahayana Sutras, such as the Lankavatara, provide decidedly vegetarian teachings. Buddhism and Vegetarianism Today Today, attitudes toward vegetarianism vary from sect to sect and even within sects. On the whole, Theravada Buddhists do not kill animals themselves but consider vegetarianism to be a personal choice. The Vajrayana schools, which include Tibetan and Japanese Shingon Buddhism, encourage vegetarianism but do not consider it to be absolutely necessary to Buddhist practice. Mahayana schools are more often vegetarian, but even within many Mahayana sects, there is aà diversity of practice. In keeping with the original rules, some Buddhists might not purchase meat for themselves, or choose a live lobster out of the tank and have it boiled, but might eat a meat dish offered them at a friends dinner party. The Middle Way Buddhism discourages fanatical perfectionism. The Buddha taught his followers to find a middle way between extreme practices and opinions. For this reason, Buddhists who do practice vegetarianism are discouraged from becoming fanatically attached to it. A Buddhist practices metta, which is loving kindness to all beings without selfish attachment. Buddhist refrain from eating meat out of loving kindness for living animals, not because there is something unwholesome or corrupt about an animals body. In other words, the meat itself is not the point, and under some circumstances, compassion might cause a Buddhist to break the rules. For example, lets say you visit your elderly grandmother, whom you have not seen for a long time. You arrive at her home and find that she has cooked what had been your favorite dish when you were a child- stuffed pork chops. She doesnt do much cooking anymoreà because her elderly body doesnt move around the kitchen so well. But it is the dearest wish of her heart to give you something special and watch you dig into those stuffed pork chops the way you used to. She has been looking forward to this for weeks. I say that if you hesitate to eat those pork chops for even a second, you are no Buddhist. The Business of Suffering When I was a girl growing up in rural Missouri, livestock grazed in open meadows and chickens wandered and scratched outside hen houses. That was a long time ago. You still see free-ranging livestock on small farms, but big factory farms can be cruel places for animals. Breeding sows live most of their lives in cages so small they cannot turn around. Egg-laying hens kept in battery cages cannot spread their wings. These practices make the vegetarian question more critical. As Buddhists, we should consider if products we purchase were made with suffering. This includes human suffering as well as animal suffering. If your vegan faux-leather shoes were made by exploited laborers working under inhumane conditions, you might as well have bought leather. Live Mindfully The fact is, to live is to kill. It cannot be avoided. Fruits and vegetables come from living organisms, and farming them requires killing insects, rodents, and other animal life. The electricity and heat for our homes may come from facilities that harm the environment. Dont even think about the cars we drive. We are all entangled in a web of killing and destruction, and as long as we live we cannot be completely free of it. As Buddhists, our role is not to mindlessly follow rules written in books, but to be mindful of the harm we do and do as little of it as possible.
Thursday, November 21, 2019
Counterterrorism and Information Systems Your protection versus your Research Paper - 1
Counterterrorism and Information Systems Your protection versus your rights - Research Paper Example The war towards terrorism has never been a smooth path, hence a number of ethical issues had to be broken. A country is always torn by the dilemma of either protecting its citizens from terrorism by use of information technology to feed them with required data to help them fight terrorism and the constitutional rights of individuals to have their personal rights. It is evident that a sound decision in such a case is necessary as this is an ethical dilemma and one that can cause problems if messed around with. Vital information regarding peopleââ¬â¢s lives is usually interfered with in the process of counterterrorism. For instance, the government usually uses personal databases to extract information about certain people hence breaching their constitutional personal rights. Faced with a tough decision on breaking its constitutional mandate to protect its citizens from terrorists and protecting their rights, somehow calls for a proper decision on whether counterterrorism use of information technology is ethical There usually so many ways which the government can combat terrorism without interfering with the personal rights of their individuals. This can involve sending spies to terrorist zones, of which it has not been successful as they eventually get discovered and stringent punishment administered to them. Another alternative to the government combating terrorism will be through fighting together with other countries to ensure that the leaders and the culprits funding them are detained. In practical sense, these has been one impossible affair since most of the terrorist groups usually live in hiding and have spies all over when soldiers come to attack them. Another alternative that can be used to combat terrorism may be through rigorous checks and racial profiling of individuals from countries prone to harbour terrorist,
Wednesday, November 20, 2019
Conflict Management in Organisations Essay Example | Topics and Well Written Essays - 2500 words
Conflict Management in Organisations - Essay Example There are different levels of which conflict occur in organizations: within the individual (role conflict where, for example, the individual feels a clash between his role as an executive and parent); between two immediate individuals; between persons when they are working in a group or in teams; between different groups within organisations (out of rivalry arising out of variety of reasons like resource allocation, mergers); and finally between the organization and the society when there is a mismatch between organizational goals and societal goals (e.g. environment). Given this situation, it is in the interest of the organization to see that conflict does not harm or injure the organizational process in achieving its goals. With the individual differences, of people who comprise the organization, it will be a futile to think of developing a group which will be free of conflict with members completely aligned and harmonious. The issue would be as to how to manage conflict in an orga nization so that it actually benefits out of it. Experts see potential positive benefits to the organization when conflict is constructively managed, not avoided. It is even recommended that conflict is stimulated by a better group performance. What this paper is about: In this paper, the attempt is to understand the general nature of conflict how it arises and why and how it should be managed by organizations. In order to have some focus on this huge and highly researched topic, the paper confines itself only to issues relating to the topic of conflict and its management process in a group/teams and the role of group leadership in successfully managing conflict. Group effectiveness is one of the key determinants of success of an organization. Groups in organizations are very often formal (departments and divisions) but increasingly their working is seen to be informal, where there is a large delegation of responsibility and where the group is allowed to choose its process and task breakups. "The ability of groups to benefit from cognitive conflict (that is, differences in information, knowledge, and opinions) can be a critical source of competitive advantage."(Philips and Thomas-Hunt, p 37)
Sunday, November 17, 2019
Issues in internet sales law Essay Example | Topics and Well Written Essays - 2000 words
Issues in internet sales law - Essay Example When a bid is made, the bidder is said to have made an offer. When the auctioneer strikes a hammer thrice or says words like ââ¬ËGoing, Going, Goneââ¬â¢, the offer is accepted and a contract of sale is made. These days, a wide variety of goods are presented for auction online. The seller does not need to meet face-to-face with the buyer or the bidder. The person who makes the highest bid wins the auction and the goods are sold to him. In the given case, Chris won an auction online and bought an artifact for ?50. He believed it to worth ?500 if it was free of chips. Otherwise, it was worth ?50 only. He saw an image of the artifact online and found no flaw in it. The seller had a feedback rating of 50 transactions. The seller had written in caption, ââ¬Å"Old pot ornament, in good condition for its age. I know nothing about these items, but it looks old to me.â⬠Also, in sellerââ¬â¢s information, he had written, ââ¬Å"all goods are sold as seen.â⬠When the item was delivered, Chris found out that it was not free of chips. S.14(1) of Sale of Goods, 1979 provides that there are no implied terms as to the condition or warranty about the quality or fitness of goods. In this case, the parties had no direct interaction. The buyer had a look at a photograph of the item online and bought it. There are no implied terms as to the warranty or condition. But S.14(2) states that, ââ¬Å"Where the seller sells goods in the course of a business, there is an implied condition that the goods supplied under the contract are of merchantable quality, except that there is no such condition- (a) as regards defects specifically drawn to the buyer's attention before the contract is made ; or (b) if the buyer examines the goods before the contract is made, as regards defects which that examination ought to reveal.â⬠According to the given facts, the seller had a feedback of 50 transactions. The given facts also quote the seller, ââ¬Å"Old pot ornament, in good condition for its age. I know nothing about these items, but it looks old to me.â⬠The online trading system often produces a dilemma whether the seller acted in the course of business or not. The former of the two facts reveals that the seller had been trading online for quite some time. This means that the seller had acted in the course of business. However, during his run in online trading, he did not sell the same type of goods every time. The later of the two facts shows that the seller did not act in the course of business because he had vividly expressed that he had no knowledge of the ornament. This puts him somewhere in the middle of the two types of actions. Taylor and Willet (2005) call such a seller a Hybrid Seller. The law is silent about this type of seller. There was no concept of such a seller until the emergence of online trading system. The most important factor in determining the rights and remedies of the buyer is the ascertainment of the fact whether it was a sale by description and whether the consumer relied on such description. Chris saw the picture and decided to purchase the ornament thinking that it would be a good investment if the ornament was free of chips. The picture in question shows that the item was a clean piece. Chris depended on the depiction by the picture and decided to purchase the item. Consumerââ¬â¢s reliance is pivotal in the cases of sale by description. S.13(1) of Sale of Goods Act 1979, states that, ââ¬Å"
Friday, November 15, 2019
X-ray Crystallography Technique Analysis
X-ray Crystallography Technique Analysis 1 Limitations of x-ray crystallography From the first crystalline structure determination of table salt in 1914; whose structure elucidation proved the existence of ionic compounds (6), single crystal x-ray diffraction (SC-XRD) has been widening our view of the hidden world of molecular structures. Today, SC-XRD continues to be the only structural analysis method that offers direct structural information at the atomic level. As such, this technique has been vital for reliably solving many structures of small molecules such as neurotransmitters, antibiotics and industrial catalysts. SC-XRD utilises the ability of crystalline atoms to scatter or diffract a beam of incident x-ray into a series of amplified and spatially constrained beams (3). The angles and intensities of these beams can be measured and computationally processed by a crystallographer to produce a 3-dimensional image of the density of electrons in the crystal. Aside from the expertise required to process the reflection data produced, the fundamental requirement of crystals for this technique acts as major limitation, since single molecules scatter the incident x-ray to produce a weak, continuous beam that provides little useful information for analysis. While technological advances in recent decades including highly intense x-ray beams produced by synchrotrons and the development of more powerful algorithms for molecular structure imaging have allowed the size of the crystal required to be increasingly smaller, the need for a crystal has still not been eliminated. This poses a great issue as many t arget compounds are very difficult to crystallise, thus requiring experienced specialists; while others will simply not crystallise at all. In 2013, a new protocol, later coined the crystalline sponge method (CSM), was reported that attempted to bypasses this intrinsic limitation of the target molecule needing to be crystalline (1). 2 The journey of the crystalline sponge method Expectations Fujita and his team described the new method that promised to speed up SC-XRD drastically by eliminating the crystallization step of the target molecule. This was done using porous metal organic frameworks (MOFs) that act as crystalline sponges. Due to the high molecular recognition capability of their pores, these sponges can absorb target molecules from the sample solution into their pores.Ãâà In their study, Fujita and his team used two MOFs synthesised from tris(4-pyridyl)-1,3,5-triazine (TTP, 1) and the appropriate metal salt as their crystalline sponges: {[(Co(NCS)2)3(TTP)4]à ¢Ã¢â ¬Ã ¢x(solvent)}n (2) and {[(ZnI2)3(TTP)2]à ¢Ã¢â ¬Ã ¢x(solvent)}n (3). In both complexes, the void spaces showed strong binding properties for incoming guest molecules making them ideal crystalline sponges. The as-synthesized complexesà ¢Ã¢â ¬Ã¢â¬ °2 and 3 contained solvents in the void. By soaking the crystals of 2 and 3 in a guest solution, guest molecules slowly penetrate these wet cavities by guest exchange, and are concentrated at the molecular-recognition pockets surrounded by TTP. A characteristic of the strong host-guest interaction in the crystals of 2 and 3 lies in panel ligandà ¢Ã¢â ¬Ã¢â¬ °1, which attracts various guests onto its electron-deficient à â⠬-plane. The slow guest exchange allows for the process to remain under thermodynamic control, rendering the geometry of the included guests to be regularly ordered and well equilibrated, thus making it possible to analyse the accommodated guests by crystallography since the molecular structure of the absorbed guest will be displayed, along with the host framework. Since theoretically, only one crystal is needed to perform the experiment, Fujitas team found that even trace sample amounts of the microgram-nanogram scale can be analysed in this protocol. When the team used only 80à ¢Ã¢â ¬Ã¢â¬ °ng of guaiazulene guest sample with a crystal of 3 (80à ¢Ã¢â ¬Ã¢â¬ °ÃÆ'-à ¢Ã¢â ¬Ã¢â¬ °80à ¢Ã¢â ¬Ã¢â¬ °ÃÆ'-à ¢Ã¢â ¬Ã¢â¬ °80à ¢Ã¢â ¬Ã¢â¬ °ÃŽà ¼m3), they were surprised to see the guestà ¢Ã¢â ¬Ã¢â¬ °was still clearly observed. Considering that the experiment was carried out using a laboratory X-ray machine, it seemed promising to accomplish crystallography with synchrotron X-ray experiments even on a mass of In order to assess the scope of the method, the team carried out blind crystallographic analysis of six appropriate samples (Fig) with only ~5à ¢Ã¢â ¬Ã¢â¬ °ÃŽà ¼g of each sample. In conjunction with mass spectroscopic data, all six structures were correctly assigned, with three of the structures solved solely from the crystallographic data. Additionally, the protocol was successfully used to determine the absolute stereochemistry of santonin 4, an anthelminthic drug bearing four chiral centres. Unlike common absolute structure determinations, this was achieved without the chemical introduction of heavy atoms on the guest skeleton since the host framework contains heavy atoms (Zn and I) that show enhanced anomalous scattering effects. (Expand The most impressive result of the teams protocol however was determining the absolute structure of miyakosyneà ¢Ã¢â ¬Ã¢â¬ °A 5, a scarce natural marine product recently isolated from a marine sponge Petrosia sp. The structure contains three chiral centres on its main alkyl chain, two of which, C3 and C26, had been previously determined to be 3R and 26R respectively. However, since the difference between the two long alkyl groups on C14 is only one methylene unit, determining the absolute configuration at C14 was ineffective by conventional spectroscopic and chemical methods. As the amount of miyakosyneà ¢Ã¢â ¬Ã¢â¬ °A was very limited, preparation a single crystal for X-ray crystallography would propose a huge challenge. The team were able apply their method to the full characterization of miyakosyneà ¢Ã¢â ¬Ã¢â¬ °A to determine the absolute configuration at C14 and reported success. For its appraisers, it was this result that made this new protocol transformational (4) and understandably it led to a lot of excitement in the field. 1.3 The Fall The initial lustre of the protocol was dulled as Fujita and his team published a correction on the initial report later that year (1b). Previously unnoticed ambiguities in the crystallographic data, alongside further investigation of by the team found the initial assignment of stereochemistry at C14 of 5 to have been incorrect. Synthetic studies by the team determined the methyls stereochemistry was opposite to the original assignment reported. Poor data quality was concluded to be the cause of this errors. Additionally, more problems were met as other research groups tried to use the technique in their own labs. Although success with the technique was achieved for simple molecules, in the first few months, other groups found little success with any interesting structures, particularly large molecules or molecules containing alkaline chemical groups (8b). Fujitas team were able to aid other industrial and academic groups to master the technique in one to two weeks. Additionally, more of the issues in reproducibility were improved by the release of a more detailed report of the method (1c) that described the sponge synthesis, pore-solvent exchange and selection requirements for high quality single crystals for crystallography. However, this did not address the issue of poor data quality that led to the misassignment of 5. Since poor data quality can be attributed to all steps of the CSM, including cystal synthesis, solvent exchange, guest-soaking, data collection and crystallographic ref inement of the host-guest complex molecules; in order to move the CSM from the fascinating idea phase into becoming the transformational and reliable new technology it was envisioned to be, much work was required to optimise all these steps. 3. {[(ZnI2)3(TTP)2]à ¢Ã¢â ¬Ã ¢x(solvent)}n: The most successful sponge to date 3.1 Andvantages of {[(ZnI2)3(1)2]à ¢Ã¢â ¬Ã ¢x(solvent)}n In their initial paper, Fujita and his team reported using sponges 2 and 3. With further investigation, in the case of complex 2, it was observed that guest molecules absorbed in the sponge were prone to static disorder as they tend to lay on the symmetry elements of the cubic lattice (Fm3m). Additionally, complex 2 was shown to undergo unfavourable transformations when removed from solution (8c). This destabilising transformation, accompanied by a colour change from orange to green, resulted in a semiamorphous solid with a significantly altered coordination environment at the metal centre. As such, the less symmetric (C2/c) complex 3 has been employed as the primary host complex for the crystalline sponge. The versatility of 3 as a crystal sponge stems from several advantages in host-guest complexation in the pores. Firstly, the size of the pores is ideal for accommodating organic molecules of common sizes, while the hydrophobic nature of the pore cavities provides favourable bindin g of common organic molecules. Also, ligand 1 in the complex offers flat and electron-deficient binding site, appropriate for stacking with aromatic compounds and for CH-à â⠬ interactions even with aliphatic compounds (9). Since the I atoms in the ZnI2 are good hydrogen-bond acceptors and the pyridyl protons of the ligand 1 are good hydrogen-bond donors, they provide efficient binding sites through hydrogen-bonding. Finally, the framework of sponge 3 is reatively flexible with the size of the guest not strictly limited to the pore size of the complex. Molecules larger than the portal are often accommodated by expanding the pore size. (1.3) 3.2.1 Synthesis of {[(ZnI2)3(1)2]à ¢Ã¢â ¬Ã ¢x(solvent)}n and solvent exchange by Fujita method and updated Clardy method In their investigations, Fujita and co-workers prepared 3 by layering a solution of zinc iodide in methanol onto a denser solution of TTP (1) in nitrobenzene. The solution is allowed to stand for 7 days, over which crystals form at the boundary of the two solvents as they diffuse before dropping to the bottom of the test tube and being isolated by filtration. The as-synthesised crystals contain nitrobenzene molecules in the void spaces. However, since nitrobenzene has a high affinity to the pores, target guests are poorly absorbed into the as-synthesised crystal. As such, a solvent exchange step that replaces nitrobenzene with an inert, noninteractive solvent is required prior to soaking the crystal in the target guest solution. Cyclohexane can be adopted as the inert solvent, while pentane also proves useful for guest soaking at temperatures below 0oC. The solvent exchange step is carried out by soaking the crystal in the inert solvent for 7 days at 50oC. The success of the process can be monitered throughout by observing the disappearance of the signal at 1346 cm-1 in an Infrared (IR) spectrum, which can be assigned to nitrobenzene. Completion of the process is confirmed by SC-XRD by the presence of ordered cyclohexane molecules in the pores. The sponge may now be used for guest absorption. This solvent exchange process may complicate the refinement of the structure, since some nitrobenzene may reamin within the sponge structure after exchange (Vinogradova et al., 2014). This becomes an issue if the target guest molecule contains cyclohexyl or aromatic rings, as it may be difficult to distinguish the guest from residual solvent, especially ifÃâà the site occupancy is low or the data quality is poor. Accompanied with heavy use of crystallographic restraints, this increases the risk of misassignment of the desired guest molecule by using residual solvent electron density. Additionally, if the residual solvent and the guest interact similarly with the host, the likelihood of occupational disorder increases and making structure refinement much more challenging. Clardy and co-workers later reported a simpler and less timely preparation method for the synthesis of sponge 3 using similar conditions to those reported by Fujita and his team. (5sync) Instead of conducting the layer diffusion step with TTP in nitrobenzene, TTP is dissolved in chloroform. As such, the as-synthesised crystals of sponge 3 contain chloroform in the pores. Since chloroform has a much lower affinity for the solvent pores than nitrobenzene, the solvent exchange step can be omitted and the as-synthesised crystals used immediately. As well as saving 7 days of preparation by omitting the solvent exchange step, this method is also milder as it does not require the crystal to be heated for long periods of time. This reduces the chances of introducing imperfections in the crystal. This omission also minimises the number of solvents that the crystal is exposed to, reducing issues in structure refinement. Although some CHCl3 might remain within the sponge after guest inclusion, due to its longer C-Cl bond length (à ¢Ãâ à ¼1.7à ¢Ã¢â ¬Ã¢â¬ ¦Ãâ¦) and larger Cl electron density, CHCl3 can still be observed. This greater electron density for CHCl3 exerts a larger influence on the structure factors relative to incorporated guest compared to nitrobenzene, however the benefits of CHCl3 usage override this issue. In addition to the desired crystals, this preparation method has been found to simultaneously form other crystalline structures. Firstly, a crystalline compound with the formula [{(ZnI2)3(TPT)2Ãâà ·CHCl3}n] (2), having a much smaller pore size has been viewed. Fortunately, this crystalline structure can be easily distinguished from the desired structure from its morphology (Fig). A second undesired crystal has more recently been observed with consistently distinct unit parameter, but having indistinguishable morphology to the desired structure from its morphology (Fig). Both these crystals are believed to form due to slight changes in humidity and temperature as well as variations in mixing in the initial stages of the layering process.Ãâà desired crystal. Both these crystals are believed to form due to slight changes in humidity and temperature as well as variations in mixing in the initial stages of the layering process.
Tuesday, November 12, 2019
Needs and Concerns of New France Essay
I am writing to you on the issues and needs of New France. Some of the concerns and needs are, the on going war with the Iroquois, population, and industry in agriculture. The Iroquois are a grand part of concern on our people in New France. Presently there is war going on amongst us and the Iroquois. Our people are afraid to go hunting or fishing. If the people are not able to hunt or fish New France is going to struggle because there will not be enough food to be provided. We will also fall behind in fur trading. Since the people are frightened we can not go on exploring lands as it may be risky because of the Iroquois. The Iroquois do not let us cross their lands, so we can not get to our preferred destination. So being in danger of the Iroquois had its disadvantages such as, being afraid so we are not able to hunt or fish, not exploring further, and not getting to our specifies destination. The population in New France is struggling with men and women. I am trying to motivate our people by giving them rewards for marrying and giving birth early. If they do not they will receive penalties. In New France we are in need of more women. So they can get married and give birth. This will increase New Franceââ¬â¢s population, and you will not have to bring in more females after that. Also there are not enough residents to occupy Canada and live in it. This is a big issue if France wants to gain power and control over other land. So I suggest that before we get more women I ask if you could send in more people to New France. In addition the population has increased in men rather so then women. This again is a problem. So again our concerns are that we are lacking women, there are not enough people in New France to later expand to a big country Canada, and more men increased then women making the population gender wise unbalanced. New France also has to develop its own agriculture and industries. In New France there is a need for agriculture businesses. In the agriculture businesses we need to organize transportation to carry crops and livestock. This will also make it easier to deliver. Another need for New France is to become fewer dependant on France, in terms of supplies, food, people, and etc. Our growing industries are also beginning to drain out Franceââ¬â¢s finances. Since we are asking for too much and not giving back enough. We should receive a loan to start of industries or to improve on them to provide us with necessities which after we trade or sell and pay off the loan. So, there is a need for agricultural businesses. New France to become more independent and our industries are beginning to drain out Franceââ¬â¢s finances. Youââ¬â¢re Majesty now that I have stated the concerns and needs for New France which are, the on going war with the Iroquois, population problems, and agriculture and its industries. I hope you will take into account the needs and concerns and hopefully come up with solutions. Thank you for taking your valuable time on this letter.
Subscribe to:
Posts (Atom)